1. Tube temperature: The temperature to be controlled during the injection molding process includes barrel temperature, nozzle temperature and mold temperature. The first two temperatures primarily affect the plasticization and flow of the plastic, while the latter temperature primarily affects the flow and cooling of the plastic.

Each plastic has a different flow temperature. The same plastic has different flow and decomposition temperatures due to different sources or grades. This is due to the difference in average molecular weight and molecular weight distribution. Plastics are used in different types of injection machines. The plasticizing process is also different, so the temperature of the selected cylinder is also different.

2, mouth temperature: injection nozzle temperature is usually lower than the barrel temperature, this is to prevent the "flow phenomenon" of the melt in the straight-through nozzle.

The nozzle temperature should not be too low, otherwise it will cause early condensation of the melt to block the nozzle, or affect the performance of the product due to the injection of the early aggregate into the cavity.

3, with temperature: mold temperature has a great impact on the intrinsic properties and apparent quality of the product.

The temperature of the injection molding mold depends on the presence or absence of crystallinity of the plastic, the size and structure of the product, performance requirements, and other process conditions (melt temperature, injection speed and injection pressure, molding cycle, etc.).